機械型號: Mechanical model |
630P絞線機/strander | ||
機器轉數: Number of machine revolutions |
一,1800轉RPM/3600扭/分 | ||
絞合限度: Stranding limit |
¢0.16七根以上銅線絞合More than seven copper wires are twisted | ||
給線徑: Feed wire diameter |
¢0.16-1.0(MM) | ||
絞合面積: Twisting pith |
¢0.8-10平方毫米/¢ 0.8-10 square mm | ||
絞合斷面積: Cross sectional area of strand |
0.4-6MM | ||
絞距: Stranding distance |
11.15--33.88-135.54 | ||
卷曲軸: Roll crankshaft |
¢300-400-500-630 | ||
主軸高度: Spindle height |
850MM | ||
主機動力: Main engine power |
5.5KW/7.5HP正弦變頻器與廣東人民馬達全銅/5.5kw / 7.5HP sine frequency converter and Guangdong people motor all copper | ||
絞向: Twist direction |
自由選擇向左或向右均可You can choose left or right freely | ||
排線裝置: Wire arrangement device |
軸承排線器,排距,排幅可任意調整/Bearing wire setter, row spacing, row width can be adjusted at will | ||
剎車系統: Brake system |
電磁剎車外部斷線時自動剎車或磁粉離合器張力控制器由機外設定(由客戶選擇)Automatic braking or magnetic powder clutch tension controller is set outside the machine when the external line of electromagnetic brake is broken (selected by the customer) | ||
升降系統: Lifting system |
有手動油壓或自動升降,由客戶選擇/There are manual oil pressure or automatic lifting, which are selected by customers | ||
整機軸承: Whole machine bearing |
全進口SKF軸承或日本NSK軸承/All imported SKF Bearing or Japan NSK bearing | ||
收線張力: Take up tension |
絞線時,收線從盤底收到滿盤時收線張力需不斷增大,本機能自動跟蹤調節收線張力;使整盤收線張力均勻一致,同時本機還能不停機調節張力。When the take-up is completed, the take-up tension needs to be continuously increased when the take-up is received from the bottom of the reel. This machine can automatically track and adjust the take-up tension, so that the take-up tension of the whole reel is even and consistent. At the same time, this machine can also adjust the tension without stopping the machine. | ||
自動停機: Automatic shutdown |
A、機內,機外斷線自動停機;B、自動計米,到米自動停機A. Inside and outside the machine, the machine will stop automatically when the wire is broken; B. the machine will stop automatically when the meter is reached | ||
設計: Design |
普通 或電腦觸摸屏(由客戶選擇)Normal or computer touch screen (customer's choice) | ||
噪音指數: Noise index |
約75分貝About 75 dB | ||
機器尺寸: Machine dimensions |
L3340*W1560*H1550 | ||
凈重: Net weight |
3350KG |
650P圓弧款式福綿絞線機