機械型號: Mechanical model |
400P絞線機/strander | ||
機器轉數: Number of machine revolutions |
一,3000轉RPM/6000扭/分 二,4000轉RPM/8000扭/分 | ||
絞合限度: Stranding limit |
¢ 0.08七根以上銅線絞合¢ 0.08 stranded more than seven copper wires? |
||
給線徑: Feed wire diameter |
¢0.08-0.45 | ||
絞合面積: Twisting pith |
¢0.3-3.0平方毫米/¢ 0.3-3.0 square mm | ||
絞合斷面積:Cross sectional area of strand | 0.035-4MM | ||
絞距: Stranding distance |
8.17-35.02 | ||
卷曲軸:Roll crankshaft | ¢300-400 | ||
主軸高度: Spindle height |
700MM | ||
主機動力:Main engine power | 4KW/5.5HP正弦變頻器與廣東人民馬達全銅/4kw / 5.5HP sine frequency converter and Guangdong people motor all copper | ||
絞向: Twist direction |
自由選擇向左或向右均可You can choose left or right freely | ||
排線裝置:Wire arrangement device | 軸承排線器,排距,排幅可任意調整/Bearing wire setter, row spacing, row width can be adjusted at will | ||
剎車系統: Brake system |
電磁剎車外部斷線時自動剎車或磁粉離合器張力控制器由機外設定(由客戶選擇)Automatic braking or magnetic powder clutch tension controller is set outside the machine when the external line of electromagnetic brake is broken (selected by the customer) | ||
升降系統: Lifting system |
有手動油壓或自動升降,由客戶選擇/There are manual oil pressure or automatic lifting, which are selected by customers |
||
整機軸承: Whole machine bearing |
全進口SKF軸承或日本NSK軸承/All imported SKF Bearing or Japan NSK bearing | ||
收線張力: Take up tension |
摩擦張力裝置,壓縮彈簧調整張力(或離合器自動張力收線)Friction tension device, compression spring adjusting tension (or clutch automatic tension closing) | ||
自動停機: Automatic shutdown |
A、機內,機外斷線自動停機;B、自動計米,到米自動停機A. Inside and outside the machine, the machine will stop automatically when the wire is broken; B. the machine will stop automatically when the meter is reached | ||
設計: Design |
普通常用型Common type | ||
噪音指數: Noise index |
約75分貝About 75 dB | ||
機器尺寸: Machine dimensions |
L2570*W1250*H1062 | ||
凈重: Net weight |
1600KG |
400七臺河絞線機常用型